Dolan-jenner 170-D User Manual download pdf

INSTRUCTION

MANUAL

Your purchase of the Dolan-Jenner

Fiber-Optic Illumination System will

provide you with many years of service

in a large variety of applications which

require high intensity, yet cool

illumination. Please read the following

instructions to ensure that maximum

performance is obtained from your system.

Model 180 and 170-D Illuminators are readily interchangeable within the systems. The

exceptions are with System 181, 181A and 181B which require the Model 180

Illuminator for the support of the self-supporting fiber optic light pipes EEG 2823, EEG

3922 and BG 2820. In addition the Model 180 has the lowest noise and vibration

characteristics that can be incorporated into any unit, which makes it especially suitable

for high magnification stereo-microscope usage.

Fiber-Lite Illuminators achieve maximum reliability and lamp life due to certain design

considerations incorporating air flow parameters that result in long lamp life and cool

housing temperatures as well as component reliability.

ADAPTERS (SX TYPE)

The Adapters fit into the Illuminator nosepiece with the flat area facing up. The idler

hole on the flat area is off center, and the shortest dimension faces the illuminator when

inserted.

The SX 5, 6, & 7 adapters are made with an idler which provides quick disconnect

features that require only a few turns of the thumbscrew on the Illuminator nosepiece to

attach or disengage the fiber optic light pipe.

SYSTEM 181 ASSEMBLY INSTRUCTIONS

Due to the self-supporting features of the fiber optic light pipes (BG 2820, EEG 2823,

EEG 3922) it is necessary to remove the thumbscrew on the Illuminator and replace it

with a 7/64 socket head cap screw provided. The SX-11 adapter is then inserted as above

followed by the fiber optic pipe with the flat surface facing up. . Then insert the fiber

optic pipe with the flat surface facing up. Use an Allen Wrench to sufficiently secure the

fiber optic so that there is no rotation.

Fiber-Lite

HIGH INTENSITY FIBER OPTIC ILLUMINATORS

MANUAL FL180/170

for Models 180 & 170-D

Illuminators

1 2 3 4

Summary of Contents

Page 1 - Fiber-Lite

INSTRUCTIONMANUALYour purchase of the Dolan-Jenner Fiber-Optic Illumination System will provide you with many years of service in a large variety of a

Page 2 - SCHEMATIC

FIBER OPTIC LIGHT PIPE INSERTIONInsert the Fiber Optic Light Pipe into the adapter and tighten the thumbscrew to secure the fiber optic in the Illumin

Page 3

FIBER OPTIC LIGHT PIPE INSERTIONInsert the Fiber Optic Light Pipe into the adapter and tighten the thumbscrew to secure the fiber optic in the Illumin

Page 4 - Components for 220V, 50/60Hz

PERFORMANCE STATEMENTDolan-Jenner Industries, Inc. (DJI) recognizes that its illuminator products may be used under an almost unlimited variety of con